How to clean the shower room

With the improvement of people's living standards, many families hope to have an independent bathing space, but due to the limited space of the toilet, the bathing facilities and sanitary ware can only be designed together. Divide the shower area to form a relatively independent bathing space, and realize the separation of dry and wet in the bathroom. Here is how to choose shower room and shower room glass cleaning skills.

With the improvement of people's living standards, many families hope to have an independent bathing space, but due to the limited toilet space, they can only design bathing facilities and sanitary ware together. Divide the shower area to form a relatively independent bathing space, and realize the separation of dry and wet in the bathroom. Here is how to choose shower room and shower room glass cleaning skills.

1. R&D and design

The R&D and design of shower room is the prerequisite and foundation of shower room manufacturing. Fully consider the three aspects of the shower room:

safety

The rationality of the structure and the material of the hardware.

Dry and wet separation

The shower room is truly waterproof from every detail to achieve complete separation of dry and wet areas.

Humanized details

Make every customer convenient and comfortable.

Exterior design

Good design can enhance the quality and beauty of the overall shower space, making it more pleasing to the eye.

2. Strict selection of materials

glass

The high-quality tempered glass used, the original piece is CSG glass, which belongs to the automotive grade tempered glass. After the tempered glass is broken, the number of particles in the 50mm*50mm area is between 40-200, and the angle of the particles is obtuse. Sharp edges and corners, impact resistance is more than 5 times that of ordinary glass.

The production process of tempered glass: There are two main production processes of tempered glass: one is to process ordinary flat glass or float glass under specific process conditions by quenching or air-cooling quenching. The other is to process ordinary flat glass or float glass through an ion exchange method to change the composition of the glass surface to form a laminated stress layer on the glass surface.

Tempered glass production steps: grinding silicon, sand, soda ash, feldspar and other raw materials into powder, weighing according to the planned batching list, mixing the weighed powder into the melting furnace, melting into molten glass, then entering the melting furnace for refining and then entering the tin bath The glass after internal molding enters the annealing furnace, annealed, cleaned, and air-dried to make the original glass. According to the processing requirements, the glass is cut, edged, and drilled to ensure that the edge of the glass is flat, without chipping or cracks. After that, the glass is cleaned and entered into the tempering equipment for tempering. Finally, the glass that has passed the impact test and the steel ball impact test can be used to make the shower room.