The shower room makes full use of one corner of the room and clearly divides the shower area with fence to form a relatively independent bath space, providing a comfortable shower environment for people. How to install the shower room?
preparation in advance
Before decorating the shower room, we need to prepare all the sanitary ware, tools and materials used in the process of decoration.
test
After the basin is installed, water test is needed to ensure the smooth flow of water. During the water test, it is necessary to ensure the normal operation of the experiment. Once the water flow is found, it needs to be re installed.
Loading Basin
After the materials are ready, we need to install the basin. Combine the parts of the basin to ensure that there is no water stain inside and at the bottom of the basin and keep the basin level. Then, according to the distance, the basin and the floor drain are connected with each other through the hose. At this time, it is necessary to ensure whether the connection between the basin bottom and the floor drain is firm.
Installation of pipe jacking
The installation of pipe jacking needs to be above the glass, so to find the installation position of pipe jacking above the glass, drilling should be carried out in advance when drilling. After that, the fixing seat and the elbow sleeve are installed and fixed above the glass.
Install the shelf
According to the needs of family life, select the height and size of the shelf, mark the location of the shelf on the wall, then screw the nuts of the laminate, fix the laminate glass, and keep the shelf vertical and horizontal with the wall and the ground.
Installation of aluminum
After the water test, we need to install the aluminum. First of all, it is necessary to determine the drilling position of aluminum and mark it on the wall. After drilling with drilling tools, we need to pay attention to the depth of the hole when drilling. Finally, after the rubber particles are driven into the drilling hole, the aluminum strip is fixed on the wall with screws. Lock the glass clip tightly at the bottom basin drilling hole, and then fix it with screws.
Installation of movable door
When the movable door is installed, it is necessary to pay attention to the installation of its hardware. High quality hardware must be selected to prevent rusting and other quality problems after long-term use, resulting in the door can not be used.
Because there is a direct relationship between the comfort of using the shower room and whether it is properly installed. So in the shower room decoration, we need to re install, from the beginning to the end of each step must not be careless.