How to maintain the shower room? Maintenance method of shower room

How to maintain the shower room? This is a problem that many consumers are concerned about, so we have sorted out some maintenance methods for the shower room. Let's learn it as soon as possible.

Maintenance of aluminum alloy frame
First of all, it is necessary to prevent direct sunlight and exposure to the sun, otherwise the spray layer will fade; second, it is not allowed to use corrosive liquids or materials to wipe; third, it is not allowed to use rough materials (including toothpaste) to wipe the surface; fourth, it is not allowed to use sharp objects to depict the surface. If there is a stain on the surface of aluminum, wipe it with neutral wash and clean water.
Maintenance of hardware accessories
At present, there are two ways of sliding block and sliding wheel for the push-pull shower door. During the use of the pulley and slide block, attention should be paid to prevent the sliding door from falling off due to the impact from below; attention should be paid to regularly clean the slide rail, pulley and slide block, and add lubricant (lubricating oil or wax); regularly adjust the adjusting screw of the slide block to ensure the effective bearing and good sliding of the slide block on the sliding door.
Maintenance of bathtub and chassis
Do not strike or impact the surface of acrylic with sharp objects to avoid damage; do not wipe the surface of acrylic with corrosive liquid like Tianna water to avoid damaging the surface luster; do not wipe the surface of acrylic with rough materials to avoid scratches; use soft dry cloth when cleaning the four walls and bottom basin of shower room. If there is slight dirt, please use a soft cloth or sponge dipped in neutral detergent for cleaning. When removing stubborn dirt, please use alcohol to remove it.

Maintenance of tempered glass
Do not strike or strike the glass surface with sharp objects to avoid damage; do not wipe the glass surface with corrosive liquid like Tianna water; do not wipe the glass surface with rough materials to avoid scratches. Once there are cracks or damage marks, be sure to inform the after-sales service at the first time, and give replacement and maintenance.
1. In order to avoid scratching the glass and affecting the visual beauty of the shower room, soft dry cloth is generally used for daily cleaning.
2. For push-pull shower room, we should pay attention to the maintenance of pulley. Avoid hitting the movable door with positive force, clean the pulley, slide rail and slider regularly, and add lubricant on time.
3. For aluminum alloy door frame, if there are stains on the surface of aluminum, you can use neutral detergent to dissolve water and wipe it.
4. For the shower room floor, do not use sharp objects to hit or hit its surface, so as to avoid damage.