Purchasing skills of intelligent shower room

Update:03 Dec 2020

First of all, remove the bathroom function from the bathroom room, which is also a part of the bathroom decoration. In terms of selection, the first impression of size and appearance can not be ignored. Style, size, style, now regular bathroom sales, are provided with free measurement and installation, for us to save a lot of trouble. Appearance, according to personal preferences, and overall toilet style, color matching, style and other aspects of comprehensive consideration.
Shower room usually has a large area of transparent material distribution, the use of materials have engineering plastics, PVC materials and toughened glass and other differences: plastic materials permeability and wear resistance, poor scratch resistance, long time will affect the beauty.
Toughened glass products are beautiful and durable, but from the perspective of safety, some well-known products are still selected. Although the risk of broken tempered glass is much smaller than that of ordinary glass
Aluminum
1 Look at the hardness of aluminum
Brief analysis: shower room aluminum often needs to support dozens of kilograms or even hundreds of kilograms of glass weight, if the hardness and thickness are not good, the shower service life will be very short, the hardness and thickness of all aluminum materials are important assessment indicators. The thickness of qualified shower room aluminum material is more than 1.2mm, and it is more than 1.5mm to walk on rail suspension glass aluminum material. The hardness of aluminum can be tested by hand pressing the aluminum frame. It is difficult for adults to deform aluminum materials with hardness above 13 degrees by hand.
2 To see whether the surface of aluminum is smooth, whether there is color difference and trachoma, and profile finish.
Recently, the application of new materials has been found from time to time. We should grasp these points in the selection: firmness, including stability, environmental protection and safety of materials.
Look at the pulley
1 check the material of the pulley and the tightness of the wheel seat
Brief analysis: the wheel seat of the pulley should be made of compression and weight resistant materials, such as 304 stainless steel and high-end synthetic materials. The seal of wheel seat is good, water vapor is not easy to enter the wheel, and the smoothness of the wheel is guaranteed.
2. See the coordination of pulley and aluminum track
Brief analysis: pulley and track should be closely matched with small gap, so it is not easy to fall off when impacted by external force, so as to avoid safety accidents.
See the adjustment function of wall material and wall clamp
Brief analysis: the wall connecting material (wall clamp) is the aluminum material connecting shower room and wall, because the inclination of the wall and the deviation of installation will cause the glass of connecting wall to be twisted, and then the glass will explode. Therefore, the wall material should have vertical and horizontal adjustment function, so that the aluminum material can match the distortion of the wall and installation, eliminate the distortion of the glass and avoid the self explosion of the glass.
Water tightness of shower room
1 joint of shower room and wall
2 door to door joint
3. Watertightness of hinge - the water tightness of the hinge is often not good because it needs to be moved
4 the joint of shower room and stone base and bottom basin
5 check the sealing performance of adhesive tape and adhesive strip